Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Test probes, wires, and clipsDescription: Test Probes Current Clamp Probes (set of 3) 200A4359 -
![]()
Description: Extech PQ3350-1 3-Phase Power & Harmonic Analyzer with 1200A 12" Flexible Current Clamp Probes6682 -
![]()
Category: Test probes, wires, and clipsDescription: Test Probes Current Clamp Probes (set of 3) 1200A8235 -
![]()
2206 -
![]()
5968 -
![]()
Description: Probe for Power and Harmonics Analyzer2495 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy PPE The LeCroy PPE series of high-voltage passive probes are widely used in fields where high-voltage measurement must be safe and accurate. The new technology uses hybrid circuits to reduce noise and overshoot to provide precise response. The fixed attenuation standard probe can automatically readjust any LeCroy 9300C or LC series oscilloscope to appropriately attenuate the probe factor. ###Note probe ring: PPE1.2KV=No; PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV=cable length: PPE20kv=3m; PPE1.2kV, PPE2kV, PPE4kV, PPE5kV, PPE6kV=2m PPE20KV peak voltage=40kV # # # High voltage oscilloscope probe6814 -
![]()
Category: test instrumentDescription: Fluke N5K 3PP54IR Norma 5000, 3 Phase w/ 3xPP54 power phase input modules, / Ethernet & printer7598 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy Passive probe PP022 is a standard probe that comes with most oscilloscopes. They are also sold as individual items and as spare parts. PP022 (PP022-1 single pack, PP022-2 two pack) has a bandwidth of 500 MHz, an input capacitance of 10 pF, and a probe tip diameter of 2.5 mm. It is a typical passive probe that provides 10:1 attenuation and has a high resistance of 10 M Ω. Its high input resistance makes this passive probe the best choice for instruments used for low-frequency signals, as it minimizes the circuit load at these frequencies. These passive probes are designed to handle voltages of at least 400 V. PP022 can handle up to 500 V. The Teledyne LeCroy passive probe has an attenuation sensing pin, which can activate the oscilloscope to automatically scale the waveform proportionally without the need for operator input. ###Note that the PP022 passive probe is compatible with Teledyne LeCroy WaveSurfer MXs-B and MSO MXs-B, WaveRunner 6 Zi, and HRO 12 oscilloscopes. Using a suitable passive probe for an oscilloscope means that the probe will be correctly compensated across the entire bandwidth range. Otherwise, only low-frequency compensation will be applied. ###Grounding lead, rigid probe tip (installed), rigid probe tip (spare), short collar (installed), spring hook, fine adjustment tool, long collar, IC insulator (black, brown, blue, green, gray -1 piece per piece), tip insulator 2.5 mm, probe tip cover, BNC adapter 2.5 mm, rotating grounding lead, rotating grounding lead adapter, grounding spring, printed circuit board adapter, spring tip, color coded ring (yellow, red, green, blue -2 pieces per piece), # # # Passive oscilloscope probe # # Note: All products in this series are available for use with tools with permanent grounding wires.6990 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy Passive probe users do not need to input, LeCroy passive probe can automatically scale oscilloscope waveforms. They are optimized for maximum waveform fidelity, including high-frequency signal components, designed to be robust and suitable for daily use. ###Note that PP007-WR is designed for the WaveRunner 6000 series, while PP007-WS is designed for the WaveSurfer 400 series oscilloscope. The physical design of these two probes is the same. All connection attachments, standards, and options are suitable for both models. PP008-1 is suitable for use with WaveRunner Xi series oscilloscopes. ###Passive oscilloscope probe # # # Note provides all products in this series for use with tools with permanent grounding wires.8951 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy Passive probe users do not need to input, LeCroy passive probe can automatically scale oscilloscope waveforms. They are optimized for maximum waveform fidelity, including high-frequency signal components, designed to be robust and suitable for daily use. ###Note that PP007-WR is designed for the WaveRunner 6000 series, while PP007-WS is designed for the WaveSurfer 400 series oscilloscope. The physical design of these two probes is the same. All connection attachments, standards, and options are suitable for both models. PP008-1 is suitable for use with WaveRunner Xi series oscilloscopes. ###Passive oscilloscope probe # # # Note provides all products in this series for use with tools with permanent grounding wires.5067 -
![]()
Category: test instrumentDescription: ScopeMeter® Attachment series** NO. no. Fluke** | **Description** ---|--- PM 8907 / 801 | European-style mains power adaptor PM 9081 / 001 | Female banana / BNC adaptor PM 9082 / 001 | Male banana / BNC adaptor VPS100 | Set of 10:1 probes, 1.2 m, 100 MHz (red and grey) ### Fluke Industrial oscilloscope accessories8327 -
![]()
Description: IPM6600 Clampmeter, Max Current 2000A ac, 2000A dc CAT III 600V1666 -
![]()
Category: Desktop power supplyDescription: AIM-TTI INSTRUMENTS PL303QMT-P Bench Power Supply, Linear Regulated, Smart Analog Controls, Adjustable, 3 Output, 0 V, 30V, 100µA3729
